 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Filename: tfs 167h.doc Version 1.4 19.08.2004 VI TELEFILTER Measurement condition Ambient temperature: Input power level: Terminating impedance: * Input: Output: 23 0 348 348 C dBm Filter specification TFS 167H 1/5 || - 7,2 pF || - 7,2 pF Characteristics Remark: The reference level for the relative attenuation a rel of the TFS 167H is the maximum attenuation in the pass band. The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 167,0 MHz without any tolerance or limit. The values of relative attenuation arel are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data Insertion loss (Reference level) Nominal frequency Pass band Amplitude variation in PB Amplitude ripple in PB Relative attenuation fN 0,4 MHz ... fN 0,6 0,6 MHz ... fN 20,0 fN fN - 20 MHz ... fN - 137 fN + 20 MHz ... fN + 103 fN +103 MHz ... fN + 105 fN +105 MHz ... fN + 833 Absolute group delay in PB Group delay ripple in PB Intermodulation ratio For two 20dBm input signals @ fN + 0,800 MHz and fN + 1,600 @ fN - 0,800 MHz and fN - 1,600 Input Return loss Output Return loss Input power level Temperature coefficient of frequency Tc f ** Frequency inversion temperature Operating temperature range Storage temperature range p-p arel typ. value ae fN PB 1,4 0,3 dB dB tolerance / limit max. 3,0 dB 167,0 MHz fN max. max. 75 1 kHz dB 0,25 dB 0,5 dB MHz MHz MHz MHz MHz MHz 9,0 18,0 56 43 65 46 dB dB dB dB dB dB min. min. min. min. min. min. max. 5 10 33 33 40 33 dB dB dB dB dB dB 1,75 s 210 ns 2,0 s ns max. 300 MHz MHz 110 110 18,0 19,0 - dB dB dB dB min. 100 min. 100 min. min. max. dB dB 15,0 dB 10,0 dB 22 dBm -0,046 ppm/K 20 C - 5 C .. + - 40 C.. + 90 85 C C *) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. **) fc(Hz) = Tcf(ppm/K) x (T - To) x fCAT (MHz). generated: checked / approved: Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. tft@telefilter.com Filename: tfs 167h.doc Version 1.4 19.08.2004 VI TELEFILTER Stability characteristics Filter specification TFS 167H 3/5 After the following tests the filter shall meet the whole specification: 1. Shock: 2. Vibration: 3. Change of temperature: 4. Resistance to solder heat (reflow): 5. ESD 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 -55 C to 125C / 30 min. each / 10 cycles DIN IEC 68 part 2 14 Test N reflow possible: twice max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; MIL-STD-883E using coupling network of ISO 10605 and EN 6100-4-2 HBM:500V; MM:500V; Packing Tape & Reel: IEC 286 3, with exeption of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters peer reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 16,00 0,3 Po : 4,00 0,1 Do : 1,50 +0,1/-0 E : 1,75 0,10 F : 7,50 0,10 G(min) : 0,60 P2 : 2,00 0,1 P1 : 12,00 0,1 D1(min) : 1,50 Ao : 7,60 0,10 Bo : 9,60 0,10 Ct : 13,5 P1 t Do Date Code Po P2 Ko Typ PIN Marker D1 Ao W2 Reel (all dimensions in mm) A : 330 W1 : 18,0 W2(max) : 22,0 N(min) : 100 C : 13,0 A C N W1 The minimum bending radius is 45 mm. Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 167h.doc Version 1.4 19.08.2004 VI TELEFILTER Air reflow temperature conditions Filter specification TFS 167H 4/5 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods 150 C - 170 C 60 sec. - 90 sec. main-heating periods over 200 C 20 sec. - 25 sec. peak temperature 255 C 5 C Chip-mount air reflow profile 260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / s ec. 140 160 180 200 220 240 Table for temperature vs. time during the air reflow process Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 167h.doc Version 1.4 19.08.2004 VI TELEFILTER History Version 1.0 1.1 Reason of Changes generate preliminary specification generation of filter specification add terminating impedance add filter characteristic change circuit test change packing (tape and reel) Filter specification TFS 167H 5/5 Name Roizengaft Date 18.11.2003 Noack 16.04.2004 1.2 correction terminating impedance add typical value for amplitude ripple amplitude variation change packing (tape) change temperature coefficient change limit of relative attenuation from 30 dB to 33dB update typical value and filter characteristic add ESD stability characteristics change drawing of packing (tape and reel) Noack Noack Noack 18.06.2004 16.07.2004 19.08.2004 1.3 1.4 Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. |
Price & Availability of TFS167H
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |